Since the introduction of FILZMOSER straightening and cutting machines in 1984, more than 240 plants are used in the European market. With the development of rotary straightening devices in hyperbolic design, a straightness hardly reached before and an undamaged wire surface are guaranteed. This is all precondition of a consequent quality assurance in the production of our customers.

FILZMOSER offers straightening machines in any performance class and with any straightening system. Steel from a coil with diameters from 5 to 16 mm can be treated, say straightened and cutted. One to six diameters can, depending on the configuration of the machine, be worked, the change of wire diameter is automatic and the speed adapts automatically to the wire diameter to be processed. Performance data depend on wire diameter and rod lenghts, a maximum wire advance of 120 m/min is possible.

Advantages:

• Fully electric machine
• High straightening accuracy by hyperbolic roller straightener units
• Also suitable for oval wire and varying wire diameter
• Minimum length tolerances
• No damage to steel structure because of the used straightening technology
• High production speed

FILZMOSER straightening and cutting lines are quickly and easily integrable into other FIL-systems e.g. Automatic reinforcing systems with robot laying or Fully automatic welding plants for reinforcing elements. All machines are soundproofed and designed to meet current safety regulations.

RA-XE: Straightening and Cutting Machines with rotary units, electrical

The RA-XE is a machine for straightening and cutting of reinforcing steel from coils. Cold deformed and hot rolled ribbed wire can be worked.

A maximum wire advance of 120 m/min is possible. By means of a fully automatic wire diameter change a changeovertime of 2 to 4 seconds is obtained. The speed adapts automatically to the wire diameter to be processed.

The RA-XE can be costructed singleline or multiline, it is certainly possible to supplement new lines - maximum number: six lines. Serveral lines can be, depending on the individual contstruction, processed in parallel. One hyperbolic roller straightener unit is available for one diameter.

Each diameter can be processed within a few seconds, production data are entered by modem operator guidance on the screen. Depending on the production purpose, the machine is equipped with one or more channeling units.

New double-sided bending for big elements DBE

For further wire processing FILZMOSER has developped a new, double sided bending device with servo drives. It is possible to produce stirrups and rods with bended endings flexibly with a leg length up to 2 meters. All customary bending shapes used for prefab slabs can be bended. Bending shapes can be defined individually by the customer.

Further, it is possible to bend several rods within one operating process. Straightened, respectively bended rods can be sorted separetely independent from the bending device. Bending devices are delivered in accordance to domestic or national diameter requirements.